Automated FFPE DNA Extraction Planning
Separate tissue preprocessing from purification and define downstream quality requirements before evaluating an equipment configuration.
An automated FFPE DNA extraction proposal should identify which preprocessing and purification stages it actually performs. Define the tissue preparation, kit, program and downstream requirements before using instrument capacity to shortlist equipment.
Formalin-fixed, paraffin-embedded material creates a different equipment brief from a fresh blood or tissue workflow. This guide helps a pathology or oncology-research lab organize that brief. It does not supply a tissue-processing protocol or claim a validated MultiEX FFPE application.
Draw the preprocessing boundary first
Promega’s FFPE automation guidance distinguishes preprocessing from purification. Its discussion includes paraffin removal, digestion, lysis and decrosslinking before the nucleic-acid purification task.
Ask for a stage-by-stage configuration response:
| Stage | Requirement to identify | Equipment question |
|---|---|---|
| Tissue preparation | Material, selection and preparation defined by the lab | What reaches the lysis procedure? |
| Preprocessing | Kit-defined paraffin removal, digestion and any decrosslinking | Which steps need separate equipment or manual work? |
| Purification | Prepared input, chemistry, program and consumables | What does the proposed extractor receive and execute? |
| Output assessment | DNA/RNA target and downstream acceptance criteria | What evidence determines whether the preparation is usable? |
The presence of a heating function does not establish that an extractor performs every preprocessing step. Request the documented chemical, vessel and program requirements rather than inferring suitability from a temperature range.
Specify the output for the next method
Record whether the project needs DNA, RNA or separate preparations. Identify the downstream assay or library method and the input checks it requires.
For example, Illumina’s FFPE quality-control guidance addresses assessment in the context of supported library-preparation workflows. Apply the requirements of the actual selected method rather than one universal FFPE quality threshold.
Ask the laboratory to distinguish total quantity, concentration and the quality or usability assessment needed downstream. A high concentration does not, by itself, show that a specimen meets the next procedure’s requirements.
If the extracted material is intended for sequencing, the NGS equipment guide adds the input/output handoff record. The RNA workflow guide covers separate RNA-preparation questions.
Plan a schedule that includes preprocessing
An instrument’s extraction capacity does not describe the time required to prepare a batch of FFPE material. Record the preparation workload, when prepared samples become available and how output assessment affects the next stage.
Use separate schedule entries for preprocessing, loading, purification, unloading and downstream checks. A longer preparation stage may be the actual constraint even when the extraction run has spare capacity.
Count controls and planned repeats in the method’s complete batch. Do not infer specimen capacity from the number of wells in the consumable alone; the throughput guide explains that distinction.
Require application evidence before a model recommendation
For a proposed automated FFPE combination, request:
- Kit and current instructions, with the defined prepared input.
- The exact equipment program and processing plastics.
- The stages the instrument performs and those it does not.
- The method-specific evaluation and downstream quality evidence needed by the laboratory.
- Any intended-use documentation relevant to the proposed purchase.
The MultiEX comparison can organize capacity and volume questions, but it does not establish FFPE compatibility. A specific configuration should not be recommended from those specifications alone.
Send an equipment-evaluation inquiry
Include the tissue preparation, target, proposed kit, expected compatible batch and downstream requirements you already know. Ask the purchasing channel whether supporting application documentation is available before treating a model as suitable.
Send an FFPE equipment-evaluation inquiry
with those questions. Technical details can remain open at first contact; a quote discussion should identify the evidence still required before ordering.
FFPE automation questions
Does automated extraction necessarily include deparaffinization?
No. Ask which preprocessing stages are included in the documented proposal and which remain outside the extractor.
Can a standard DNA capacity table establish FFPE suitability?
No. It describes equipment scale. The prepared input, chemistry, program, plastics and downstream assessment determine the method-specific evaluation.