Forensic DNA Extraction Equipment Evaluation
Define sample classes, extraction controls and output records before assessing an automation proposal for an identification laboratory.
Evaluate forensic DNA extraction equipment against a defined sample class and laboratory method. Reference swabs, mixed material and challenging case samples should not be treated as one interchangeable instrument input.
The useful purchasing task is to identify the evidence a proposed configuration must supply. This guide organizes that task without claiming that MultiEX is validated for forensic casework, every trace sample or any accreditation requirement.
Separate the sample classes in the brief
Ask the laboratory to identify which methods are actually in scope for the proposed purchase. A successful demonstration with one convenient sample does not establish performance for the rest of the workload.
| Requirement group | Questions to document |
|---|---|
| Reference material | Which collection system, preparation and extraction method apply? |
| Challenging or limited material | What input constraints and evaluation evidence does the lab require? |
| Mixed material | Does the laboratory method require separation or preparation outside purification? |
| Inhibitor-prone material | How will interference with the downstream procedure be assessed? |
| Extracts for further analysis | What output, remaining material and identity records must be retained? |
These are specification questions. Use the lab’s procedures to define the actual sample classes and processing steps; do not derive a forensic protocol from a general equipment article.
Preserve different control purposes
The NIJ’s archived training on STR controls illustrates an extraction blank separately from amplification controls. It is useful background for understanding why the control plan affects the equipment brief, rather than a substitute for current laboratory requirements.
Ask which controls pass through preparation and extraction and which are introduced downstream. Reserve the positions needed by the proposed method before calculating specimen capacity.
Keep contamination, recovery and inhibition questions separate. A control designed for one purpose cannot automatically answer the others. The laboratory should define the checks and acceptance criteria for its own evaluation.
Specify identity records through manual transfers
List the handoffs between incoming material, prepared sample, extraction position and final eluate. For each handoff, ask how identity is recorded and verified.
A requirements record can include run identifier, method/program revision, vessel positions, operator entries and the disposition of the output. This does not imply that an extractor supplies those records automatically.
Ask separately about supported barcode, software and electronic-record functions. Connectivity, a touchscreen or USB program transfer does not establish a chain-of-custody system or laboratory information-system integration.
The biobank/CRO equipment guide provides a general sample-to-eluate record example. Forensic purchasing requirements need their own laboratory review.
Compare capacity only after the method is defined
Identify the compatible sample group, controls and planned repeats that belong in one run. Include preparation, loading and output handling when comparing the proposed workflow with current practice.
The MultiEX model comparison can help organize instrument sample-count, volume and consumable questions. Those specifications do not establish forensic suitability or analytical performance.
Before a specific model enters the shortlist, request the proposed kit/IFU, application evidence, equipment program and consumable specification. Identify the preprocessing and separation stages performed outside the extractor. An open-system description is not proof that an existing forensic method transfers unchanged.
Ask for evidence with the configuration
Send the sample class, preparation method, proposed kit, working-volume requirements, complete batch and required output record. Explain which supporting documents the lab needs to assess the configuration.
Send a forensic equipment-evaluation inquiry
to ask whether the required application information is available. Share what is known and keep unresolved details as questions. This is an equipment purchasing discussion, not an offer of forensic testing or method-validation services.
Forensic equipment questions
Does a reference-swab demonstration establish trace-sample suitability?
No. The proposed sample classes and methods need their own supporting evidence and laboratory evaluation.
Does UV equipment establish contamination-free results?
No. A contamination-control feature does not guarantee a result. Assess the complete method, handling and controls under the laboratory’s requirements.